China Professional American Type Trailer Axle Shaft Outboard Drum Trailer Steering Axle axle dump

Product Description

American type trailer axle shaft outboard drum trailer steering axle

Product Description

  1. Special heat treatment, low alloy steel axle beam, good comprehensive performance, strong bearing capacity, low dead weight;
  2. High quality alloy solid spindle provides superior fatigue resistance through integral heat treatment;
  3. Camshaft adopts special sealing processing to ensure that grease will not enter the brake drum, which is more safe;
  4. New tight fit wheel hubcap, O-ring seal, good sealing performance; 
  5. Extend the free maintenance time.

 

Product Parameters

    

Inboard drum series trailer axle
Axle Type Max Capacity
(T)
Track
L2 (mm)
Brake
(mm)
Spring Seat Installation Axle Beam
(mm)
Centre Distance Of Brake Chamber
(mm)
Wheel Fixing Total Length
(mm)
Recommended Wheel Axle Weight
(kg)
Stud P.C.D
(mm)
H
(mm)
HRD-UI08 8 1850 420*150 ≥1080 Round 127 428 10*M22*1.5 ISO 335 280.8 ~2145 7.5V-20 323
HRD-U13I1 13 1840 420*180 ≥970 Round 127 388 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 360
HRD-U13I2 13 1840 420*180 ≥970 Round 127 382 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 342
HRD-U13I3 13 1840 420*180 ≥930 Square 150 388 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 358
HRD-U13I4 13 1840 420*180 ≥930 Square 150 382 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 340
HRD-U14I1 14 1840 420*220 ≥930 Square 150 342 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 358
HRD-U15I1 15 1850 420*180 ≥980 Round 127 390 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 344
HRD-U15I2 15 1850 420*180 ≥940 Square 150 390 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 370
HRD-U16I1 16 1850 420*220 ≥980 Round 127 350 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 362
HRD-U16I2 16 1850 420*220 ≥940 Square 150 350 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 388
HRD-U20I1 20 1850 420*220 ≥940 Square 150 345 10*M24*1.5 ISO 335 280.8 ~2247 8.5V-20 430
HRD-U25I1 25 1850 420*220 ≥940 Square 150 340 10*M24*1.5 ISO 335 280.8 ~2215 8.5V-20 474

 

Outboard drum series trailer axle 
Axle Type Max Capacity
(T)
Track
L2 (mm)
Brake
(mm)
Spring Seat Installation Axle Beam
(mm)
Centre Distance Of Brake Chamber
(mm)
Wheel Fixing Total Length
(mm)
Recommended Wheel Axle Weight
(kg)
Stud P.C.D
(mm)
H(mm)
HRD-U13O1 13 1840 420*180 ≥970 Round 127 392 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 345
HRD-U13O2 13 1840 420*180 ≥970 Round 127 388 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 363
HRD-U13O3 13 1840 420*180 ≥970 Round 127 372 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 348
HRD-U13O4 13 1840 420*180 ≥970 Round 127 372 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 360
HRD-U13O5 13 1840 420*180 ≥970 Square 127 392 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 340
HRD-U13O6 13 1840 420*180 ≥970 Square 127 388 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 358
HRD-U13O7 13 1840 420*180 ≥970 Square 127 372 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 343
HRD-U13O8 13 1840 420*180 ≥970 Square 127 372 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 355
HRD-U13O9 13 1840 420*180 ≥930 Square 150 392 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 343
HRD-U13O10 13 1840 420*180 ≥930 Square 150 388 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 361
HRD-U13O11 13 1840 420*220 ≥930 Square 150 372 10*M22*1.5 ISO 285.75 220.8 ~2180 7.5V-20 346
HRD-U13O12 13 1840 420*220 ≥930 Square 150 372 10*M22*1.5 ISO 335 280.8 ~2180 7.5V-20 358
HRD-U13O13 13 1820 420*180 ≥910 Square 150 388 10*M22*1.5 ISO 335 280.8 ~2150 7.5V-20 340
HRD-U15O1 15 1850 420*180 ≥940 Square 150 398 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 385
HRD-U16O1 16 1850 420*220 ≥940 Square 150 358 10*M22*1.5 ISO 335 280.8 ~2200 8.0V-20 405

Production Process

Trailer Axle Process Manufacturing

Packaging & Shipping

Shipping way: Air shipping, sea shipping and railway shipping. 
Packing: anti-rust treatment, packed by pallet or in contactiner. 

Company Profile

HangZhou Hongruida Trailer Parts Co., Ltd. mainly produces semi trailer and its related accessories, including various types of American type trailer axle, concave axle, spoke axle, German type trailer axle, agricultural axle, American type suspension, single point suspension, rigid suspension, air suspension, landing gear, kingpin, air chamber, air reservoir, etc. Our sales network covers all regions of the world. Both new and old customers support customization.

Advanced processing technology, first-class production line, professional production quality, high-quality service concept, guarantee your trailer business brighter! The products are produced strictly in accordance with national implementation standards, with reasonable prices, and the cost performance ratio is far ahead in the industry, which is highly praised by customers!
 
Source strength manufacturers, welcome your inquiry!

 

Why Choose US

1. High strength material with strong carrying capacity and high bending, which makes more flexible and reliable. 
2. Advanced processing technology, first-class production line, strict inspection process to provide superior products.

3. Accept customization, we have a professional design team and rich experience engineering who can design products according to customers’request.
4. We are a manufacturer and could accept urgent order and control delivery time well.

 

5. We always upload the integrity pragmatic, innovation efficiency, service customer business purpose.
6. We have a on-time after-sale service team, who can provide service and solve problem within 24 hours.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Condition: New
Axle Number: 2
Application: Trailer
Material: Steel
Type: Rear Axles
Samples:
US$ 450/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

What is the role of axles in electric vehicles, and how do they differ from traditional axles?

Electric vehicles (EVs) have unique requirements when it comes to their drivetrain systems, including the axles. The role of axles in EVs is similar to traditional vehicles, but there are some key differences. Here’s a detailed explanation of the role of axles in electric vehicles and how they differ from traditional axles:

Role of Axles in Electric Vehicles:

The primary role of axles in electric vehicles is to transmit torque from the electric motor(s) to the wheels, enabling vehicle propulsion. The axles connect the motor(s) to the wheels and provide support for the weight of the vehicle. Axles are responsible for transferring the rotational force generated by the electric motor(s) to the wheels, allowing the vehicle to move forward or backward.

In electric vehicles, the axles are an integral part of the drivetrain system, which typically includes an electric motor(s), power electronics, and a battery pack. The axles play a crucial role in ensuring efficient power transfer and delivering the desired performance and handling characteristics of the vehicle.

Differences from Traditional Axles:

While the fundamental role of axles in electric vehicles is the same as in traditional vehicles, there are some notable differences due to the unique characteristics of electric propulsion systems:

1. Integration with Electric Motors: In electric vehicles, the axles are often integrated with the electric motors. This means that the motor(s) and axle assembly are combined into a single unit, commonly referred to as an “electric axle” or “e-axle.” This integration helps reduce the overall size and weight of the drivetrain system and simplifies installation in the vehicle.

2. High Torque Requirements: Electric motors generate high amounts of torque from the moment they start, providing instant acceleration. As a result, axles in electric vehicles need to handle higher torque loads compared to traditional axles. They are designed to withstand the torque output of the electric motor(s) and efficiently transmit it to the wheels.

3. Regenerative Braking: Electric vehicles often utilize regenerative braking, which converts the vehicle’s kinetic energy into electrical energy and stores it in the battery. The axles in electric vehicles may incorporate systems or components that enable regenerative braking, such as sensors, controllers, and electric brake actuators.

4. Space Optimization: Electric vehicles often have different packaging requirements compared to traditional internal combustion engine vehicles. The axles in electric vehicles are designed to accommodate the space constraints and specific layout of the vehicle, considering the placement of the battery pack, electric motor(s), and other components.

5. Weight Considerations: Electric vehicles strive to optimize weight distribution to enhance efficiency and handling. Axles in electric vehicles may be designed with lightweight materials or innovative construction techniques to minimize weight while maintaining structural integrity and durability.

It’s important to note that the specific design and characteristics of axles in electric vehicles can vary depending on the vehicle manufacturer, drivetrain configuration (e.g., front-wheel drive, rear-wheel drive, all-wheel drive), and other factors. Automotive manufacturers and suppliers continually innovate and develop new axle technologies to meet the evolving demands of electric vehicle propulsion systems.

axle

Where can I purchase high-quality replacement axles for my make and model of vehicle?

When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:

  1. Authorized Dealerships:
  2. Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.

  3. Independent Auto Parts Stores:
  4. Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.

  5. Online Retailers:
  6. Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.

  7. Specialty Performance Retailers:
  8. If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.

  9. Local Salvage Yards:
  10. Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.

  11. Vehicle Manufacturer’s Online Parts Store:
  12. Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.

When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:

  1. Tire Wear and Longevity:
  2. Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.

  3. Optimal Traction:
  4. Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.

  5. Steering Response and Stability:
  6. Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.

  7. Reduced Rolling Resistance:
  8. Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.

  9. Vehicle Safety:
  10. Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.

To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.

It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.

China Professional American Type Trailer Axle Shaft Outboard Drum Trailer Steering Axle   axle dumpChina Professional American Type Trailer Axle Shaft Outboard Drum Trailer Steering Axle   axle dump
editor by CX 2024-01-15