China Standard Brake Pads Trailer Parts Hub Bearing 750 Lbs-8000 Lbs Trailer Spare Parts Wheel Hub Bearing wholesaler

Product Description

 

Product Description

item	Trailer Hub Bearing
Use	Trailer HUB Parts
Parts	Trailer Bearing
OE NO.	4inch to 12.25*5 inch Hub /Drum bearing
Max Payload	8000 lbs
Size	12.25*5″
Place of Origin	China
	ZheJiang
Brand Name	Airui
Type	Light trailer bearing
Application	trailer axle

Detailed Specification:

7″ 9″ 10″ 11″ 12″ 12 1/4″ electric/hydraulic/mechanical brake assembly 
for almost all kinds of light and medium-duty trailer usage.

Iron frame with air bubble film and plastic film :

 

 

Our Advantage

 

1>Our joint venture partners are American Famous axle company AXLETEK,we have make a cooperation for 6 years.So we can supply stable and high quality brakes.

2>We have Researching and Development Department in Detroit,so we are also capable of developing products according drawing or samples to meet the special requirement of our customes.

3>We can supply 7 inch,10 inch,12 inch and 12.25 inch brakes for the moment.

4>All the parts for the brakes are produced by ourself,so we can supply our customer high quality products with resonable price.

5>We can also supply axle assemly.
 

 

Specification

 

 

 

• more product models

 

Model No.	Brake type	Wideness	Thickness	Voltage	Cylinder	Max. Load
B07E(AZ008)	Electric Brake	7	1 1/4	12		2,000 lb
B10E(AZ004)	Electric Brake	10	2 1/4	12		3,500 lb
B11E(AZ017)	Electric Brake	11	2	12		6,000 lb
B12E(AZ003)	Electric Brake	12	2	12		7,000 lb
B35E(AZ056)	Electric Brake	10	1 3/4	12		3,500 lb
B44E(AZ063)	Electric Brake	10	2 1/4	12		4,400 lb
B10EA(AZ571)	Electric Brake self-adjusting	10	2 1/4	12		3,500 lb
B11EA(AZ064)	Electric Brake self-adjusting	11	2	12		6,000 lb
B12EA(AZ571)	Electric Brake self-adjusting	12	2	12		7,000 lb
B35EA(AZ060)	Electric Brake self-adjusting	10	1 3/4	12		3,500 lb
B44EA(AZ057)	Electric Brake self-adjusting	10	2 1/4	12		4,400 lb
B10EAP(AZ037)	Electric Brake self-adjusting w/parking	10	2 1/4	12		3,500 lb
B12EAP(AZ036)	Electric Brake self-adjusting w/parking	12	2	12		7,000 lb
B07EP(AZ034)	Electric Brake with Parking lever	7	1 1/4	12		2,000 lb
B10EP(AZ013)	Electric Brake with Parking lever	10	2 1/4	12		3,500 lb
B12EP(AZ011)	Electric Brake with Parking lever	12	2	12		7,000 lb
B35EP(AZ061)	Electric Brake with Parking lever	10	1 3/4	12		3,500 lb
B44EP(AZ062)	Electric Brake with Parking lever	10	2 1/4	12		4,400 lb
B09M(AZ038)	Mechannical Brake	9	1 3/4			3,000 lb
B09H(AZ031)	Hydraulic Brake	9	1 3/4		Duo-servo	3,000 lb
B10H(AZ007)	Hydraulic Brake	10	2 1/4		Uni-servo	3,500 lb
B12H(AZ006)	Hydraulic Brake	12	2		Uni-servo	7,000 lb
B10HB(AZ012)	Hydraulic Brake free-backing	10	2 1/4		Uni-servo	3,500 lb
B12HB(AZ571)	Hydraulic Brake free-backing	12	2		Uni-servo	7,000 lb
B10HBP(AZ019)	Hydraulic Brake free-backing w/parking	10	2 1/4		Uni-servo	3,500 lb
B12HBP(AZ018)	Hydraulic Brake free-backing w/parking	12	2		Uni-servo	7,000 lb
B10HP(AZ026)	Hydraulic Brake with Parking lever	10	2 1/4		Uni-servo	3,500 lb
B12HP(AZ571)	Hydraulic Brake with Parking lever	12	2		Uni-servo	7,000 lb
B1208E(AZ001a)	Heavy duty Electric Brake	12 1/4	3 3/8	12		8,000 lb
B1210E(AZ001b)	Heavy duty Electric Brake	12 1/4	3 3/8	12		10,000 lb
B1212E(AZ002)	Heavy duty Electric Brake	12 1/4	5	12		12,000 lb
B1208EP(AZ035)	Heavy duty Electric Brake w/Parking	12 1/4	3 3/8	12		8,000 lb
B1210EP(AZ001c)	Heavy duty Electric Brake w/Parking	12 1/4	3 3/8	12		10,000 lb
B1210H(AZ571)	Heavy duty Hydraulic Brake	12 1/4	3 3/8		Duo-servo	10,000 lb
…to be continued. More trailer chassis parts-axle,hub,drum,caliper… are available too

  

Packaging & Shipping

 

Generally, in neutral white boxes and brown cartons or as ur requirements.

All our products would be offerd to you only after they passed a series of serous tests. We offer them to you with an easy heart because we know you will be satisfied and safe with our product.

Company Profile

 

 

 

 

Established in 2006, HangZhou Airui Brake System Co., LTD is a Sino-American joint venture. The American AXLE TEKNOLOGY LLC is a famous AXLE company, specializing in the design, development and manufacture of AXLE and its parts, and has rich experience in the development of brakes, drums, AXLE and other trailer parts. One of the largest bridge and spare parts suppliers in Europe.

The company has passed the national CCC certification, ISO9001, TS16949 quality system certification, North American Vehicle parts AMECA certification, Canadian Standards Association CSA certification, ECE certification, technology has reached the world’s advanced level, and obtained a number of technical patents, has been widely recognized by customers. Company factory area of 65,000 square meters, more than 500 employees, including more than 30 professional technical research and development personnel, equipped with the world’s leading laboratory, specializing in trailer, rv bridge, brake, brake drum, spring suspension, connector, casters and related parts production, development and sales in one.

Products are mainly exported to the United States, Canada, Australia and other countries and regions. Core products, electromagnetic brake, axle, electromagnet, and other wheel end trailer parts, annual output of 2 million sets, accounting for more than 90% of the domestic export of similar products market share, North America 40-50% market share.

FAQ

1. who are we?

We are based in ZheJiang , China, start from 2006,sell to North America(67.00%),Oceania(20.00%),Domestic Market(6.00%),South America(00.00%),Eastern Europe(00.00%),Southeast Asia(00.00%),Africa(00.00%),Eastern Asia(00.00%),Western Europe(00.00%),Central America(00.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Brake Assembly and Parts,Axle Assembly and Parts,Brake Pad,Brake Lining

4. why should you buy from us not from other suppliers?
1> be good at the formulation explore and develop,development team rank top 3 in China
2> huge sales department in America
3>with 8 years manufacture experience
4>300 acers factory
5>ISO/TS16949 and CSA certification
6>products sales over the world

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,JPY;
Accepted Payment Type: T/T,L/C,PayPal;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.